Logic Controlled Relay - Momentary

• Switcher Type - Audio

• Operating Temperature (Maximum): 131 F
• Operating Temperature (Minimum): 14 F
• Control Inputs: SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment’s open-collector output turns relay on when open-collector is on.
  Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1.
  5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied.
  24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.
• Control Output: SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRs
• Switching Contacts: Double-pole, double-throw
• Maximum Switching Power: 60 W (220 Vdc, 125 Vac, 2 A)
• Power Requirement: 24 to 33 Vdc @ 50 mA GROUND-REFERENCED

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-3
Kit to Mount ST, TX Series Modules on FP Panel

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel